Email
info@vayudootaviation.com
Phone No
+91 7276526726
become a pilot
Home
About us
courses
CPL
ATPL
RTR(A)
Airline Cadet Program
IGRUA Entrance Prep
B.Sc. Aviation
Pilot Training
INDIA
USA
CANADA
SOUTH AFRICA
NEW ZEALAND
EUROPE
Aircraft Type-Rating
Airbus A320
Boeing 737
Blogs
contact
CPL Test Series
Question Bank
Questions for EFIS
Answer the following questions
Test Mode
Training Mode
1. When using EHSI, weather radar may be displayed on following settings
map, expanded VOR/ILS.
expanded map, VOR/ILS, plan.
VOR/ILS, map, expanded plan.
map, VOR/ILS.
2. WXR display is controlled from
a special control panel.
captains EHSI control only.
co-pilots EHSI control only.
both captains and co-pilots EHSI control panels.
3. This following yellow symbol appears in place of the normal radio altitude display when
the selected radio altitude has been reached
the aircraft descents below 1000ft AGL.
the radio altitude needs re-setting on the EHSI
there is a failure of the radio altimeter
4. Modes available for (EFIS) HSI on some units are
VOR, ILS, MAP and AUTO TRIM.
MAP and PLAN.
only from manometric sources.
airspeed and Mach.
5. Airspeed is shown
only on the flight management CRT.
on both EHSIs.
on both EADIs.
only on the captains EHSI.
6. WXR display is on:
a special screen.
on both the captains and co-pilots CRTs.
the captains CRT only.
the co-pilots CRT only.
7. An EFIS as well as having a control panel, symbol generators and a remote light sensor also has
EADIS and EHSIs
EADIs and EICAs
EHSIs and altitude indicator
EADI and WXR display tubes.
8. With an EFIS flight director using IRS guidance, reference north can be
magnetic north between 73°Nth and 65°Sth and true north above these latitudes.
magnetic north between 65°Nth and 73°Sth and true north above these latitudes.
magnetic north between 75°Nth and 75°Sth and true north above these latitudes.
magnetic north only.
9. Decision height is adjusted and set on the
ADI or HSI
HSI section of the EFIS control panel.
ADI section of the EFIS control panel.
flight management computer.
Submit
Make New Set
