Email
info@vayudootaviation.com
Phone No
+91 7276526726
become a pilot
Home
About us
courses
CPL
ATPL
RTR(A)
Airline Cadet Program
IGRUA Entrance Prep
B.Sc. Aviation
Pilot Training
INDIA
USA
CANADA
SOUTH AFRICA
NEW ZEALAND
EUROPE
Aircraft Type-Rating
Airbus A320
Boeing 737
Blogs
contact
CPL Test Series
Question Bank
Questions for R* B*L* RADIO ALT
Answer the following questions
Test Mode
Training Mode
1. How does a radio altimeter work?
Measures the Doppler shift of a pulse transmission
Measures the Doppler shift of a CW transmission
Measures the time from transmission to the reception of a CW frequency. Doppler shift - There has to be relative motion. Hence there is no Doppler shift in Radio Altimeter.
2. For the landing configuration a radio altimeter indicates?
Height of the flight deck above the ground
Height of the main wheel above the ground
Height of the aircraft above the ground
3. A RADALT provides?
Density altitude
Height above terrain
Pressure altitude
4. Low altitude radio altimeters operate on the _____ wavelength?
Centimetric
Metric
Decimetric
5. The failure of the radio altimeter would cause?
Loss of density altitude data
Loss of height data
Loss of pressure altitude data
6. If there is a fault in the system the radalt display will?
Freeze
Needle will disappear and an alarm flag will appear, possible accompanied by an audio warning
Turn red and activate an aural warning
7. A radio altimeter measures?
Height above the ground or water over which the aircraft is flying
True Altitude
Pressure Altitude
8. Radio altimeter gives height indications by
Measuring time diff. of a CW transmitted at fixed frequency
Measuring the Doppler frequency shift in transmitted frequency
Measuring time diff. of a CW transmitted at changing frequency
9. A radio altimeter is?
Aircraft based and indicates true height
Aircraft based and indicates pressure altitude
Aircraft based and indicates true altitude
10. Radio altimeters are accurate only within the height range?
Zero to 2500 ft
Zero to 50 ft
Zero to 500 ft
11. A radio altimeter has a maximum effective height because?
At greater heights the signal will be absorbed by moisture in the air
At greater heights from different modulation cycles will overlap
At greater heights the signal will be too weak
12. Radio altimeters are
Used to determine altitude above msl
Crucial to GPWS operations
Not required for GPWS operations
Submit
Make New Set